» Welcome, guest.
[ Log In :: Register ]

 

[ Track this topic :: Email this topic :: Print this topic ]

Topic: Why wont my PumpItUp 2 / NX2 work via home machine< Next Oldest | Next Newest >
11:28 CST :: 11/15/2020

Zyzienzergling
*Level 1 PH Member*

Profile PM 

Group: Members +SP
Location: Canada
Joined: Feb. 2017
Total Posts: 7


Hey Guys,

I have a few Original Hard drive and Dongles for a few different version.

My goal is to convert the Hard Drives into an SSD to work with the dongle for longevity.

I do have an MK6 that will boot NX2 and PIU2 with no issues.
I can also boot the SSD PIU2 W/Dongle ofc using the Original MK6.

This is currently my bench mark to get working since the NX2 gives me other issues. Perhaps fixing the PIU SSD will make NX2 HDD/Dongle work on the Custom MK9.

I have a custom MK9 I built using the PH guide.

G41C-GS R2.0
Intel Celeron E3400
2x 1024 DDR2
GeForce 210 512Mb

20:44 CST :: 11/15/2020

Zyzienzergling
*Level 1 PH Member*

Profile PM 

Group: Members +SP
Location: Canada
Joined: Feb. 2017
Total Posts: 7


I did some research on this forum. It says you cannot successfully Copy anything above PIU2 which is fine I suppose.

Currently my MK9 does not load the NX2 with Dongle. It goes into what looks like a loading loop. There was a video that claimed to enable SATA but it is as far as I can tell.

The copy version only freezes when it tries to load in comparison.

1 replies since 11:28 CST :: 11/15/2020 < Next Oldest | Next Newest >

[ Track this topic :: Email this topic :: Print this topic ]

 

Quick Reply: Why wont my PumpItUp 2 / NX2 work via home machine
Guest

Do you wish to enable your signature for this post?
Do you wish to enable emoticons for this post?
Track this topic

Emoticons :: iB Code
For more options such as extra emoticons and file uploads, use the "add reply" button instead of Quick Reply...